Description
How to switch between Chinese and English:
1. Power off, then press and hold down the menu key to power on at the same time, release the menu button, at this time, the English interface will be displayed, wait 10 seconds for the system to save, save the data, then shut down and restart, in this way, the switch to English.
2. If you want to switch to Chinese, turn off the machine, then press and hold down the menu key to start the machine at the same time, release the menu button, and the Chinese interface will be displayed at this time. Wait for 10 seconds for the system to save the data, and then shut down and restart the machine. Upgraded version
18650 Lithium Battery Capacity Tester Module Product features:
The product supports single channel capacity and internal resistance measurement
Supports individual charging and discharging, up to 9 charging and discharging cycles in automatic mode:
11 levels of adjustable stopping and discharging voltage
DC two-wire method for internal resistance testing, switchable between English and Chinese:
Maximum charging and discharging flow is about 1A
Upgrade points:
1. Chinese and English interface adjustable
2. Adjustable 11 levels of stopping and discharging voltage
3. Support 1-9 times automatic cycle
4. Increased completion status indication
5. Charge measurement increased.
6. The new version also supports testing 21700 batteries, with 21700 battery holder, you can achieve DIY transformation
Caution:
Please ensure that the environment is open and uncovered, if you can add a fan to dissipate heat, it is better.
In order to ensure that the battery clamps firmly, 18650 battery holders use compact battery holders, suitable for flat-head battery measurement!
Does not support the charging of lithium iron phosphate batteries
Basic parameters:
Working power supply: DC5V power supply or 18650 battery need to provide their own
Applicable battery: meet the stop discharge voltage 2.5 ~ 3.5V, 2.8V start ~ 4.2V full battery are applicable
Power supply interface: Type-C interface, power supply cable self-provided C-port mobile phone cable
System language: Chinese default, English
Number of tests: 1-channel charge and discharge measurement right-hand battery position only
Internal resistance measurement: supported, using the DC two-wire method to test internal resistance
Charging function: supported, full automatic cut-off charging LiFePO4 charging not supported
Discharge function: supported, automatic stop when conditions are met, discharge current is not adjustable
Automatic charging and discharging: supported, battery is fully charged at the end of automatic mode
Cycle charging and discharging: supported, 1~9 cycles adjustable only supported in auto mode
Status indication: supported
Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 levels adjustable
Discharge current: two-way resistor, max. 1A current, not adjustable, does not support independent transformation
Charging voltage: special battery charging chip control, max. 1A charging, full charge voltage 4.2V
Power failure save: only the setting parameters are saved, not the measurement data
Product weight: 80g net weight 120g including packaging
Product dimensions: 110 x 88 x 30mm
Package size: 153×100×42mm
Information link:
//www.banber.com/gather/6365d57f9f8cae0007718211.html
Shipping list:
18650 battery capacity tester X1
XH-M240 Battery testers 12V 18650 Lithium Battery Capacity Tester Module MAh MWh Digital Battery Power Detector Module Indicate
Product description:
Product name: 18650 lithium battery true capacity tester
Display accuracy: 0.1
Measurement accuracy: 1mAH
Power supply voltage: DC5~12V/18650 battery power supply
Standby current: 5~7mA
Discharge current: about 500mA
Load power: 10W8Ω
Appearance size: 110 x 80 x 25mm
Installation size: 72 x 53
Installation aperture: 3mm
1.About 18650 battery:
The minimum discharge stop voltage of 18650 battery is generally: 2.75V. Under normal circumstances, when the voltage drops to 0.875 times the rated voltage 3.24V
It should be charged, and then continue to use, the voltage will drop rapidly, there may be over-discharge and damage, affecting the life. Recommended discharge termination
The voltage is set to 3.5V
The charging voltage is generally: 4.20V-4.3V/4.35V.
2.Measurement time calculation:
Assuming that the battery capacity is 2000mAH, the discharge current of this tester is about 500mAH, 2000:500=4, and the measurement time is about 4 hours about.
ZB2L3 Battery Capacity Tester LED Display 18650 Lithium Battery Power Supply Test Capacity Discharge Meter DC4.5-6V
Product Description:
1. Using high-quality materials, the quality is guaranteed
2. Simple and convenient wiring
3. With micro USB interface
4. With two 5W ceramic resistors
5. Good performance
Product parameters:
Power supply voltage: DC4.5-6V micro USB interface
Working current: no more than 70mA
Discharge voltage: 1.00V-17.00V resolution 0.01V
Termination voltage range: 0.5-14.5V
Support through current: no more than 3.500A resolution 0.001A
Voltage measurement error: less than 1+0.02V
Current measurement error: less than 1.2+-0.002A
Battery capacity range: 9999Ah 1Ah=1000mAh when the value is large, switch by decimal point shift, when it is lower than 10Ah, it is displayed as X.XXX, when it reaches 10Ah or more, it is displayed as XX.XX, and so on.
How to use factory default:
1. The battery under test should be fully charged first
2. Connect the positive pole of the battery under test to the positive input, and the negative pole to the negative pole of the input, do not connect reversely reverse connection with load may damage the circuit! Connect the load to the output positive pole and the output negative pole, and connect the working power supply to the micro USB of the tester do not use the desktop or notebook USB power supply, and the battery voltage will be displayed at this time.
3. To start the test directly, you only need to press the OK button, the tester can automatically formulate the appropriate termination voltage according to the fully charged voltage of the battery, and the test will start after flashing for 3 times. Press the + or – button to modify in the display state, the termination voltage is displayed as the beginning of P, the back represents the voltage value, and the resolution is 0.1V. After setting, press OK to start the test
4. After the test starts, the tester will turn on the electronic switch that controls the load, and the data display during the test will display in turn among the discharge capacity Ah, the current discharge current A and the battery voltage V. Press the button to quickly switch the display content. When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, and the displayed data stays on the capacity Ah and flashes rapidly together with the corresponding indicator light. The displayed capacity at this time is the actual battery capacity. Discharge capacity, press OK to stop flashing and make the data display stably, press the OK button again to restore the power-on state to replace the battery and test the next section
Supplement: During the test, you can press the button + to exit the current test and keep the discharged data, and the tester returns to the voltage display state. At this time, the + and – buttons are allowed to modify the termination voltage and press OK Continue to start the test; or you can exit the current test and clear the discharged data by pressing the – button.
Advanced function settings:
In the case of no power supply, keep pressing the OK button and turn on the microUSB power supply, the tester enters the function setting, there are two settings, use the + – button to modify and the OK button to enter the next item and save quit:
Setting item 1: The automatic voltage identification function AUon/AUoF means enable/disable. Please manually set the termination voltage after it is disabled, and the value of each setting will be automatically saved at the same time.
Setting item 2: Automatic rotation display function ALon/ALoF means enable/disable. After disable, the display content will not be automatically switched during the test, but can only be switched manually
Error code and meaning:
Err1: The battery voltage is higher than 15V
Err2: The battery voltage is lower than the set termination voltage
Err3: The battery cannot withstand the load discharge current or the internal resistance of the line is too large
Err4: The current is too large the current exceeds 3.1A
Err5: Improper use or wiring error has caused the device to burn out and cannot be used current sampling or control switch MOS burnt
Precautions:
1. If the battery is reversely connected, when the load is turned on and the load current is large about >0.8A, the circuit switch tube may be damaged
2. The factory has been calibrated and tested one by one, and it is designed with a secondary calibration function
3. In order to improve the accuracy of voltage measurement, this circuit has specially designed a DC bias. When the terminal is not connected to anything, a small voltage will be displayed, which does not affect the actual measurement. If you short-circuit the input terminal it must be 0V at this time It will display 0. If you want to understand the principle, you can refer to the superposition theorem in electrical engineering.
Shipping list:
Ceramic resistor X2
Battery capacity tester module X1
Type-C LCD Display Battery Capacity Tester MAh MWh Lithium Battery Digital Battery Power Detector Module 18650 Battery Tester Digital Measurement High Precision
Product Description:
1: Specially used to measure 18650 battery capacity
2: The integration of charging and discharging eliminates the tedious operation of disassembling and assembling the battery to replace the charging and discharging of the device
3: The size of the discharge current can be switched and it is convenient to use
4: Small size, easy to carry
5: stable performance
This product is a 18650 battery capacity tester, which is specially used to measure the capacity of 18650 batteries. The 1.77-inch TFT display can simultaneously display information such as battery internal resistance, capacity, voltage, current, power, etc.; The tedious operation of charging and discharging equipment; preset three modes of automatic, charging and discharging, after selecting the corresponding mode, start the equipment, and the program will run automatically; the size of the discharge current can be switched for convenience.
Technical parameter:
①Install the power supply 18650 battery and the 18650 battery to be tested;
②Use the Type-C data cable to connect the Type-C power supply port to the 5V power supply. The external power supply is used to charge the battery in the CHG state. If you only need to discharge the DSG, you can leave it unconnected;
③Select the mode, the default is AUTO automatic mode;
④Click the Start button to start the program;
⑤Wait for the process to end and the status indication to stop.
About power-off storage:
This product has no power-off storage function. Shutting down, restarting, and switching the working mode can cause the accumulated data to be cleared as shown below.
It can be used well
The working mode corresponds to the state change
Product name: 18650 battery capacity internal resistance tester charging and discharging integrated version
Working voltage: DC5V
Detection voltage: ≤DC5V
Capacity measurement range: 0~99999mAh
Energy measurement range: 0~99999mWh
Battery internal resistance measurement: support, measurement error is about 10
Display real-time voltage: support
Display real-time current: support
Display real-time power: support
Log run time: support
Working mode indication: support
Current Status Indication: Supported
Simultaneous discharge: not supported simultaneous discharge of 18650 battery Test① and external power supply Test② is not supported
Discharge load: 10W 8ΩJ cement resistance × 2
Discharge current selection: ≈0.5A or ≈1A
Charging interface: Type-C
External discharge interface: Type-C
Preset discharge stop voltage: 3V not adjustable
Preset full stop voltage: 4.2V not adjustable
Data storage: The measurement data is not saved, and the accumulated data is automatically cleared when the power is turned off or when the working mode is switched.
Product size: 108×85×24mm
Product weight: 80g net weight
Charge and discharge time reference:
AUTO automatic mode: The battery discharged in advance is charged ~ the default current is about 1A to discharge 1704mAh ~ it is fully charged again to trigger the program to stop, which takes 437 minutes and 23 seconds.
DSG discharge mode: When the battery is fully charged, it uses a current of about 1A to discharge 1681mAh, which takes 118 minutes and 55 seconds.
CHG Charging Mode: The capacity and energy are not measured during charging, only the time is recorded, which takes 164 minutes and 51 seconds
Package List :
1 x 18650 battery capacity internal resistance detector automatic charging and discharging module
Reviews
There are no reviews yet.