Additional information
Type | Kitchen Lighters |
---|---|
Certification | CE / EU |
Feature | Stocked |
Model Number | 787E9 |
Plastic Type | Melamine |
Material | Plastic |
Internetowy sklep tanio
402.50 $
85 in stock
Type | Kitchen Lighters |
---|---|
Certification | CE / EU |
Feature | Stocked |
Model Number | 787E9 |
Plastic Type | Melamine |
Material | Plastic |
GN-787E quick-loading alcohol base material electric heating vaporization controller function description
The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the effect of no need to switch, fire with heart, and start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear self-reset switch to achieve more convenient gear position control. There are also models with infrared anti-air burning to choose from, easy to achieve considerable energy savings.
The controller is quick and easy to install, stable, adaptable and user-friendly, and cost-effective enough to be a replacement for the alcohol-based fuel gasifier industry. Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V
3, the service life: the number of actions is not less than 100,000 times 4, heating output power: no more than 2000W
5, ignition output: AC220V, power is not more than 100W
6, electromagnetic pump output: AC220V, power is not more than 100W, full power range PWM voltage regulation 7, temperature probe: K-type thermocouple
8, personality function: external one-word rocker switch or three-speed self-reset switch need to buy, precision firepower adjustment function need to buy, infrared anti-air burning function need to buy Wiring instructions
1. Brown-blue black sheathed wire: Connected to 220V AC power supply, the leakage circuit breaker and a bipolar switch should be installed at the front end of the power supply to play the role of reliable control of the total power supply and safety protection.
2, brown-blue black sheathed wire with cold-pressed flat connector: plug-in burner aluminum ring heating wire, internal switching device adopts high-power relay, and adopts unique switch control technology, life is longer than conventional Greatly extended.
3. Brown-blue black sheathed wire with cold-pressed round connector: Plug-in electromagnetic pump, its output voltage is adjustable AC voltage, due to the unique micro-computer controlled high anti-interference non-contact PWM The power adjustment technology can obtain stable output even when the igniter is ignited, and there is no malfunction. Matching with commonly used imported electromagnetic pumps allows the electromagnetic pump to perform optimally.
4. Black sheathed cable with black combination connector: plug the 220V igniter.
5. Black sheathed wire with ring lug and blue soft sheath: Use the small screw to connect the split lug of the K-type thermocouple, pay attention to ensure the correct polarity.
6. Three-core black sheathed wire with split lug: Connect one-way two-way rocker switch or three-speed self-reset switch. The switch with the branch line is on the same side, and the other line with no branch is connected to the other side of the switch.
7. There are two black sheathed wires with waterproof joints, which are connected to the infrared emitting head and the receiving head with glass window. The receiving head is a four-core cable, which is connected by the attached special extension cable. The receiving head on the back panel. Setting instructions
The following instructions are all performed when the controller's settings are in the factory state, the controller is connected to the thermocouple, and the power is turned on. Whether other interfaces are connected or not connected does not affect the setting operation.
After the controller is powered on, all the digital tubes and LED indicators will be lighted up. You can use this opportunity to check whether there are any missing or missing lights. Finally, the digital tube displays OFF, which is the shutdown state. In this state, the setting operation cannot be performed.
Press the start/stop button in the off state, the system enters the heating or standby state, and the digital tube displays the current temperature value and the gear position value respectively. The current temperature value is the temperature measured by the current thermocouple. When the gear position value is not activated, the display is 0. . In this state, you can perform the setting operation:
1. Modify the output power parameter of the electromagnetic pump: press and hold the setting button for about 5 seconds, the red digital tube displays d-1, indicating that the first power output parameter setting menu is entered, and then press the setting button, the green digital tube displays the current output of the gear. The percentage of power, at this time press the increase and decrease buttons, the power output parameters can be adjusted between 0-100.
★ Parameter confirmation save: adjust the parameters, press and hold the setting button, the number starts to flash until the red display SAU, indicating that the parameter is saved successfully, and the system exits the setting state.
★ After adjusting the first gear parameters, if you need to adjust other gear parameters, you can press the setup button again to return to display d-1, and the data is temporarily stored. Press the increase/decrease button to enter d-2, d-3 and other gears in turn, and set the parameters according to the above method. Finally, press and hold the setting button until SAU is displayed, and all parameters are saved before one time.
★If the above operation does not long press the setting button and display SAU, the new parameters will not be officially saved. If there is no operation for a few seconds or the system is started by pressing the start/stop button, the system will still run according to the original parameters.
★ d-1 first file default value 28.5; d-2 second file default value 32.5; d-3 third file default value 36; d-4 fourth file default value 42; d-5 five file default value 44.
2, modify the underlying parameters: display d-5 and then press the minus button, the digital tube shows the SP begins to enter the underlying parameter settings menu, and then press the minus button to display Ao1, SC, HHH, ddH, odH, oPP, SPP, SoP, FHS , SEP and other menus.
1 SP menu is the target temperature value option; default value: 190 ° C; setting range: 130-300 ° C.
★Parameter meaning: heating to this temperature stops preheating.
★ At this time, press the setting button, the digital tube will display the target temperature value, press the increase or decrease button to change the parameter, and the parameter confirmation save method is the same as before. The same applies hereinafter and will be omitted.
★ If you do not press any button for 5 seconds, the setting state will be automatically exited, and the parameter will not be memorized.
2 Ao1 menu is the ignition start temperature value option; default value: 130; setting range: 100-190 °C.
★ Parameter meaning: After reaching this temperature value, it is allowed to start work.
3 SC menu is the error correction value option; default value: 0; setting range: ±20 °C.
★ The meaning of the parameter is: When the current temperature is found to be different from the value measured by the standard thermometer, this value can be set according to the error value to correct the current temperature value to reduce the error.
4 HHH menu is the high temperature protection value option; default value: 450; setting range: 300-500 °C.
★ The meaning of the parameter is: After the temperature is reached, the system automatically protects, and the system forcibly stops the electromagnetic pump output.
5 ddH menu is the delay ignition time option; default value: 0; setting range: 0-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will be started after the corresponding time delay.
6 odH menu is the continuous ignition time option; default value: 6; setting range: 1-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will stop after the corresponding time.
7 The oPP menu is the boot gear option; the default value is 2; the setting range is 0-5.
The meaning of the parameter is: the output power gear value of the electromagnetic pump at the time of starting.
8 SPP menu is the shutdown gear option; default value: 1; setting range: 0-1.
The meaning of the parameter is: 1 is automatically returned to the second gear after shutdown, and then the second gear is started. 0 is to keep the original gear after the shutdown, and then the original gear is activated.
9 SoP menu is the startup mode option; default value: 1; setting range: 0-1.
The meaning of the parameter is: when the parameter is 0, the system can only be started by pressing the start/stop button or by the precision adjuster; when the parameter is 1, the system adds the function that can be started by pressing the add button, the rocker switch or the right-hand precision adjuster. .
10 FHS menu is soft and hard start option; default value: 1; setting range: 0-1.
The meaning of the parameter is: 0 is a hard start, that is, booting directly from the start gear. 1 is a slow start, that is, it automatically rises from the 2nd gear slowly when it is turned on, until it increases to the gear position before the shutdown. Slow start is only valid when the SPP parameter option is 1.
11 SEP menu is a precision adjusted speed option; default value: 3; setting range: 1-30.
The meaning of the parameter is: the adjustment amount corresponding to the minimum angle of rotation of the external precision regulator can also be understood as the speed adjusted during rotation. The smaller the value, the finer the adjustment and the slower, and vice versa.
3, restore the factory settings: the controller is powered off, press and hold the minus button at the same time to turn on the power, display the rEc release button, long press the set button until the display SAU means that the factory settings are successful, all the parameters can be set at this time Both returned to the factory state.
Working process: Description under factory settings
Power on to the OFF state, press the Start / Stop button to enter the preheating state, the heating lamp lights up, the digital tube displays the current temperature and gear position, the output of the heating tube has an output of 220V to start heating, when the temperature reaches 130 °C, the status light Start flashing, the prompt can start the work manually, press the “Start/Stop” button or the key or fine adjustment knob to start, the status light turns to steady after the start, the ignition and the electromagnetic pump vaporization start to have the output and the corresponding indicator. Lights up, after 6 seconds, the ignition output stops, the indicator light goes out, and it enters the combustion state. At this time, the output of the heating tube still has an output, and the heating lamp is still lit until the current temperature reaches the desired target temperature to stop the heating output and extinguish the heating lamp.
After the current temperature reaches the target temperature, if the operation is not started by pressing the “Start/Stop” button, the system enters the thermal insulation working state, and the heating and heating is automatically performed. The temperature of the burner is always maintained near the target temperature, ready to start working.
Firepower adjustment method: 1 Press the “increase or decrease” button during the combustion process, and the firepower will gradually increase and decrease the gear position according to the set value of the gear position. 2 Rotate the fine adjustment knob during the combustion process, the firepower can be continuously and smoothly adjusted.
Stop method: 1 Press the “Start/Stop” button during combustion. 2 Press “fine adjustment knob” during combustion. 3 In the combustion, turn the “fine adjustment knob” counterclockwise to the minimum firepower, and then rotate. 4 In the first state of combustion, press the “minus” button. 5 In the first stage of combustion, operate the rocker switch to downshift.
Power-on method: Press the “Start/Stop” button when the 1 status light is flashing. 2 Press the “fine adjustment knob” when the status light is flashing. 3 Turn the “fine adjustment knob” clockwise when the status light is flashing. 4 Press the Add button while the status light is flashing. 5 When the status light is flashing, operate the rocker switch to increase the gear.
After using the above 12 shutdown and then booting, it is started from the system default gear.
After using the above 345 to shut down and then boot, it is started from the first gear.
Shutdown method: Press and hold the “Start/Stop” button or “fine adjustment knob” for about 3 seconds during the stop or combustion work, and the system will enter the OFF state. Precautions:
★The temperature value does not rise and fall during the heating process, indicating that the polarity of the thermocouple is reversed, and the “LLL” will be displayed later.
★ The thermocouple open circuit will display HHH and the system protection will stop. It needs to be restarted after the fault is removed.
★When the highest-grade setting value is too large, the pump oil will exceed the head's vaporization capacity, and the flame yellowing instability will occur.
★When the starting temperature setting value is too low, the flame will be unstable due to insufficient vaporization.
★ If you find that the flame is unstable when you just click it, you can set the ignition to delay 1-2 seconds to start the ignition, so you can avoid the knocking phenomenon at the moment of starting. Especially for models with air defense, it is necessary to set up this frequently because of the frequent start-up. Practice shows that this works well.
More than 95 of the ovens are suitable for this igniter. Check the parameter fan voltage 220V, solenoid valve voltage 24V, solenoid valve is 12V can also be used You can use this igniter! Features: used in gas water heaters, gas ovens applicable to New South, Dewey, Hongling, Honglian, Henglian, Mingtai, Bao, Xiangxing, Debao, Baozhu, Kitchen Po, Lijia, Nanguo Baoli Gas ovens, etc., with automatic ignition and fault alarm function, adopt American PIC chip, have stable performance, strong anti-interference ability, high reliability, safety and stability, and convenient system design. The pulse igniter is a gas oven control system, which [...]
68.13 $ Add to cartMain function description of commercial steam boiler ignition controller: First, the product features: 1, working voltage: 175V-245VAC 2, with water level detection, water shortage protection. 3, with wind pressure switch safety protection control fan, if no wind pressure switch, the wind pressure switch line is short-circuited. 4, with pseudo-fire, residual fire safety protection 5, with accidental flameout safety protection. 6, with a fault alarm prompt function. 7, control a 3V [...]
71.25 $ Add to cart1, product model: DQ3. 2, the main function: delay super ignition. 3, working voltage range: AC175V-245. 4, the service life: ≥ 100,000 times. 5, ignition intensity: super ignition, can ignite flammable gas and various alcohol-based biofuels. The igniter can also ignite alcohol-based fuel when the ignition needle is wet, so it is especially suitable for igniting alcohol-based fuel. 6, ignition high pressure: ≥ 15Kv. 7, delay to stop the ignition time: turn on the AC 220V power supply, automatically stop the ignition after 12 seconds of ignition, time delay ignition can be determined according to customer requirements 8, the whole [...]
73.75 $ Add to cartZQ1 alcohol based fuel steam controller system description First, the configuration: 220V electromagnetic pump; 220V fan; super ignition; start button compatible switch; wind pressure switch; lower water level probe; ignition needle; fire needle; status indicator. Second, the applicable products: Alcohol based fuel steam generator Third, the work process: When the start button is turned on, the fan runs immediately. When the wind pressure switch is turned on, the ignition starts and the 220V electromagnetic pump is started, and the alcohol-based fuel is sprayed. When the fire detector detects the flame controller, the ignition is stopped, and the system enters the [...]
96.25 $ Add to cartDomestic LME11. 330C2 Domestic LME11. 330C2BT Original LME11. 330C2 Original LME11. 330C2BT LME11. 330C2 combustion controller is used for intermittent operation of single stage small capacity up to 350KW gas burners. LME... is used for monitoring and control of single-stage or double-stage gas burners during start-up and intermittent operation. Flame monitoring is through ionizing rod or flame detector QRA and auxiliary equipment AGQ3 or using blue flame detector QRC. According to the size and specifications of the enclosure, LME... is the same combustion controller as LGB and LMG refer to «Model Overview» Convenient remote reset, multiple colors, display error status [...]
126.25 $ Add to cartBasic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V 3, the service life: the number of actions is not less than 100,000 times 4, fan power: no more than 600W 5, ignition output: AC220V, power is not more than 100W 6, electromagnetic pump / valve output: AC220V, power is not more than 100W 7, circulating water pump output: AC220V, power is not more than 1000W Wiring instructions 1. Brown-blue black sheathed wire: Connected to 220V AC power supply, the leakage circuit breaker and a bipolar switch should be installed at the front end of the power [...]
140.00 $ Add to cartCommercial stove infrared anti-air burning controller function description The controller is a commercial stove controller without fan control the fan can be independently controlled, which can realize automatic high-energy ignition and anti-air burning, and meet the needs of automatic control and safety protection of modern kitchen stoves. Controller working process: The controller turns on the power switch, starts ignition, opens the air valve, and after 12 seconds, the ignition stops and enters the combustion state. At this time, the infrared sensor head and the receiving head constitute a pot sensor to detect whether there is a pot on the furnace, [...]
177.50 $ Add to cartF2 type with fine adjustment anti-air burning commercial stove controller description The controller is suitable for the alcohol oil electromagnetic pump injection combustion system with blower, has infrared automatic air defense burning function, external igniter, can realize automatic high energy ignition and air defense burning, can meet the automatic control and safety energy saving needs of modern kitchen stoves. . Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V 3, the service life: the number of actions is not less than 100,000 times 4, fan power: no more than 300W 5, igniter power: AC220V, no more [...]
208.75 $ Add to cartDHLG12 Single-head Pulse Igniter Battery Firing Double-headed Firearm For Gas Features: Brand new and high quality Made of high quality material, durable and wear-resistant Easy to use stable performance Installation and use of A1 igniter: 1. It is necessary to drill a hole of 18mm on the stove panel for installation. Installation on the stove panel is equivalent to grounding and will not be electric. 2. Press the cover to fire continuously. If you dont press it, it will not fire. There will be sparks within 1CM of the ignition needle close to the metal body burner head Specification: [...]
Features: x 1. It is made of high-quality copper and plastic, sturdy and durable. x 2. It is suitable for restaurants and household to make food. x 3. Unfreeze meat and water pipe. x 4. Use for the heat-shrinkable sleeces and their connectores. x 5. Be applied in microwelding involving copper-welding, silver-welding, tin-welding and ornament processing. x 6. It can be fixed on butane tank, which can be replaced, cycle use is value: 50 -140g / h Material: Copper,PlasticFlame temperature: 1300°, flame temperature adjustableThere must be the use of butane gas cartridge. Not includedPackaging includes:1 x Flame GunNotes:1.The [...]
Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V 3, the service life: the number of actions is not less than 100,000 times 4, fan power: no more than 600W 5, ignition output: AC220V, power is not more than 100W 6, electromagnetic pump / valve output: AC220V, power is not more than 100W 7, circulating water pump output: AC220V, power is not more than 1000W Wiring instructions 1. Brown-blue black sheathed wire: Connected to 220V AC power supply, the leakage circuit breaker and a bipolar switch should be installed at the front end of the power [...]
140.00 $ Add to cartZQ1 alcohol based fuel steam controller system description First, the configuration: 220V electromagnetic pump; 220V fan; super ignition; start button compatible switch; wind pressure switch; lower water level probe; ignition needle; fire needle; status indicator. Second, the applicable products: Alcohol based fuel steam generator Third, the work process: When the start button is turned on, the fan runs immediately. When the wind pressure switch is turned on, the ignition starts and the 220V electromagnetic pump is started, and the alcohol-based fuel is sprayed. When the fire detector detects the flame controller, the ignition is stopped, and the system enters the [...]
96.25 $ Add to cartOLP220 burner controller Technical performance and structural characteristics: Japan Olympia fuel burner controller. OLP220-1 standard fuel controller is widely used in boiler, food drying, coating and drying industries. Japan Olympia fuel burner controller. OLP220-8 does not detect the light source before operation, and is suitable for special applications such as smelting furnaces and incinerators, that is, it is mainly used when there is a fire source in the operating furnace. Installation Precautions: 1. The wiring of each terminal of the controller must be strictly insulated from the high-voltage ignition cable. 2. Don't confuse the live wire and the neutral wire. [...]
133.75 $ Add to cartMetal Flame Gas Torch Blow Torch Cooking AutoIgnition Butane Gas Welding-Burner Heating Welding Gas Burner Flame Lighter Features: 1.Flame And Temperature Can Be Adjusted, The Temperature Can Be As High As 1350° 2.Wind Proof, Moisture Proof And Water Resistant, Better Than Electric Welding. 3.Fully Automatic Electronic Ignition, Safe And Easy. 4.Ergonomic Design For Comfortable Holding In The Hand. Suitable For Restaurant, Household, Picnic, Hiking, Camping And Other Outdoor Activities. 5.It Can Be Fixed On Butane Tank, Which Can Be Replaced, Cycle Use Is 6.Combustion Value: 50 -140g / H. A Can Of Gas Can Use 1.6 Hours To [...]
Stainless Steel Garlic Press Convenient Manual Garlic Peeler Curved Hand-held Garlic Spud Garlic Smasher Squeezer Description: Material: stainless steel PP Main use: can be peeled after the garlic crushed into mashed garlic Color: green, orange, black, stainless steel Style: modern minimalist Specifications: 1. Arc manual garlic press, arc garlic pressing structure, saving time and effort 2. The garlic hole is pressed intensively, and the garlic is pressed out by the fine hole. 3. Put the garlic on the cutting board and apply force to crush it back and forth. 4. Handle design, save effort to press garlic and feel comfortable [...]
Garlic Press Manual Garlic Masher Stainless Steel Garlic Press Chopping Garlic Tool Vegetable Home Kitchen Gadget Accessories Description: Material: stainless steel PP Main use: can be peeled after the garlic crushed into mashed garlic Color: green, orange, black, stainless steel Style: modern minimalist Specifications: 1. Arc manual garlic press, arc garlic pressing structure, saving time and effort 2. The garlic hole is pressed intensively, and the garlic is pressed out by the fine hole. 3. Put the garlic on the cutting board and apply force to crush it back and forth. 4. Handle design, save effort to press garlic and [...]
Multifunction Stainless Steel Garlic Press Grinding Grater Crush Tool Presser Curved Garlic Grinding Slicer Chopper Press Gadget Description: Material: stainless steel PP Main use: can be peeled after the garlic crushed into mashed garlic Color: green, orange, black, stainless steel Style: modern minimalist Specifications: 1. Arc manual garlic press, arc garlic pressing structure, saving time and effort 2. The garlic hole is pressed intensively, and the garlic is pressed out by the fine hole. 3. Put the garlic on the cutting board and apply force to crush it back and forth. 4. Handle [...]
Dear friends, welcome to my shop. If you buy two, you will get an extra 3 off, if you want wholesale, please contact me and give you the lowest price I will ship it for you within 24 hours. Item: Wax Seal Stamp Head Material: Gold-plated brass head Seal diameter: 25mm •Product usage: DIY scrapbook /album log /handicraft /envelop [...]
Artificial Glowing Effect Fish Tank Aquatic Pet Supplies Aquatic Landscape Glowing Effect Jellyfish Home Fish Tank Decoration Description: 100 Brand new and high quality Practical and durable home using product Ideal decoration for the fish tank or aquarium Incredibly detailed imitative jellyfish Transparent colors;air-filled floating Moved by water currents Attaches by thin invisible line and suction cup, can be controlled the random position Harmless to all fish Realistically molded in soft silicon For both fresh and softwater Glowing effect: the glowing effect is the fluorescence effect: When the object obsorbed the energe like ultraviolet,Solar [...]
Specification MG1-33 MG1-33/G60 Mechanical Seals Shaft Size 33mm Replacement To B02 MG1 Seal For Pumps - Shaft diameter: 10 ... 100 mm 0.39 ... 3.94- Pressure: 16 bar 230 PSI,- Vacuum: ... 0.5 bar 7.25 PSI, up to 1 bar 14.5 PSI- Temperature: -20 ° C ... +140 ° C -4 ° F ... +284 ° F- Angular speed: 10 m / s 33 ft / s- Permissible axial displacement: ± 2.0 mm Shipping Items will be shipped within 7 business day once payment received PORTAL we will check your credit card,and it will take about 24 hours and holiday [...]
66.94 $ Add to cartLiquid Foundation Oil Control Cosmetics Face Makeup Concealer Moisturizing Concealer Foundation Cream Face Contour Description: Brand: YZS Product Name: Moisturizing Concealer Liquid Foundation Applicable people: general Skin Type: General Net content: 30g Shelf life: 3 years Product color: natural color, ivory white, translucent color Product weight: 41.4g Product size: 3 x 15.2 x 2.5cm Product Quantity: 1 Specifications: 1.【Full Coverage Makeup】Full coverage protective makeup that feels light and breathable while achieving a natural look. 2.【Create a lasting makeup look】Anti-oil and anti-sweat all-day makeup, high concealer, hides pores, not afraid of high temperature, excellent oil control effect, from morning to night, [...]
$11.79-18.45 $1.47-5.31 $2.77-10.17 $1.30-6.08 $3.49-68.02 $3.03-66.61 $8.58-118.44 $0.60-4.83 3-28mm Steel Aluminum Pipe Cutter Brass Copper Tube Hose Cut Tubing Cutting Hand Tool Feature: 1. The cutter is made of high-quality alloy steel, which has a longer service life and more durable. 2. The hard and sharp aluminum alloy blade can provide users with fast, neat cutting and labor-saving cutting experience. 3. Adjust the opening by rotating the handle of the pipe cutter; suitable for pipes with a diameter of 3-28mm. 4. It can be used to cut plastic pipes, copper pipes, brass pipes and aluminum pipes. 5. The knives [...]
Spoon Rest with Lid Holder Heat-Resistant Pot Lid Holder Spatula Ladle Utensil Rests for Kitchen Countertop Stove Top Dine Table Features: Keep multiple kitchen utensils in a place while cooking and baking. The are kept together, but not touching, so there is no cross-contamination. There are several sinks at the bottom to separate the spatula from the oil and sauce to catch drips. The taller rim accommodates larger lids, the larger slots accommodate more utensils, and the longer base accommodates spoons. Made of PP, food-grade material, heat-resistant to 155°C, dishwasher safe, easy to clean. Specification: Material: PP Weight: about [...]
Description: Round Shape Hamburger Press Food-Grade Plastic Hamburger Meat Beef Grill Burger Press Patty Maker Mold Kitchen Tool Material: PVC Shape: Round Colour: white Mold Diameter: 13.2cm Pressing Plate Diameter: 10.6cm Specifications: Hamburger patties mold maker Durable and easy to clean Made from high quality material PVC, safe and no harm to people. Put the meat in the Hamburger Press, and then it will do pretty shape for you. Package Included: 1 x Meat Press Tool Notes: 1. Measurement of the item lying on the table may cause slight difference. 2. The [...]
Chcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.